Very good DIY for fuel injector cleaning. Shows how to clean your injectors and install new filters, “O” rings, pintel caps, etc.
DIY Injector cleaning
October 7, 2010
DIY fuel injector cleaning
Bosch Injector flow rate, part code and resistance table
I got this from a guy off the S2forum.
Bosch Injector Flow Rate & Resistance
Cliff Notes:
Bosch Number: cc/min @3bar Resistance (ohm)
RS2 = 0280150984 359 14.5
Ford Cobalt Blue Top / SVO (94/95 Thunderbird SC/ Mercury XR-7 SC)
0280150968 359 14.5
These figures are not exact like this Electronic Fuel Injector (EFI) Flow Data Table but its another source.
You can find the “0280150968″ Blue Top Ford Injectors (which I believe is also used in the GMC Typhoon/Syclone trucks) cheap ~$100 on Ebay or “cheap” at a junk yard.
Both the Audi and Ford Injectors are the old Bosch EV1 style injectors.
March 20, 2009
Injector flow rates and part numbers
AAN injectors
Run at 4.0 bar FPR in S4/S6
Bosch 0 280 150 951
Audi 034 906 031B
280 cc/ min @ 3.0 bar
315 cc/ min @ 3.8 bar
323 cc/ min @ 4.0 bar
361 cc/ min @ 5.0 bar
ADU (RS2) Injectors
Run at 3.8 bar FPR in RS2
Bosch 0 280 150 984
Audi 034 906 031F
360 cc/ min @ 3.0 bar
405 cc/ min @ 3.8 bar
416 cc/ min @ 4.0 bar
465 cc/ min @ 5.0 bar